Duck Call Bands will make a very nice addition to any duck call barrel.
The Brass Bands are 1/2″ wide, 1 1/4″ O. D., 1.182 I.D. and .035 wall thickness.
The Aluminum Bands are 1/2″ wide, 1 1/4″ O.D., 1.178 I.D. and .035 wall thickness.
All of our Duck Call Bands are Unpolished.
Brass Pins are used for pinning your band on your call. (Not recommended with acrylic or micarta) Measurement: 0.050 thousandths of an inch.
Drill bits are used for drilling holes in your duck call bands to tap your pins in and hold them for the life of the call. Measurement: 0.046 thousandths of an inch.
Mandrel is 5/8″ tapered. 1 foot long made of tooling steel. Will fit in 1/2″ chuck and has hole in tip for live center. Using a 5/8″ drill bit on your barrels will allow it to slip on to the mandrel nice and snug and allow for no truer turning than you have ever done.
All inserts come with Rubber O-rings.
Rubber O-rings fit on our inserts and work best when silicone grease is applied to them.
If you’re looking for inserts to put into your barrels we have a very nice selection for you to choose from:
Timber Duck Call Inserts
Open Water Duck Call Inserts
Canada Inserts and Speckle belly Inserts
Brass, Aluminum, Brass Pins, Drill Bit, Mandrel, O-Rings
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased. You can return unwanted items by mail within 90 days of receipt of your product. Item needs to be in the same condition it was received.
All returns can be sent to:
123 Vernon Harvey Road
Beebe, AR 72012